Pleated pool & SPA filter-PS Series
This filter is fabricated by folding antibacterial polyester fiber material into multiple layers. The filter can have either the end caps made of PP material or the soft end caps made using AB curing. The filter possesses mechanical strength, light resistance, and high-temperature resistance. Furthermore, the filter can be reused through regular cleaning, thereby reducing both the frequency of replacement and the total usage cost.
Feature
High rejection rate and large dirt holding capacity
High flow and low water pressure drop
Can easily be cleaned for reuse
Application
Household swimming pool
Public swimming pool
Children SPA water circulation
PARAMETERS
Material of Components |
|
Filter material |
PP, polyester film |
End cap |
PP, PO |
Sealing gasket |
NBR or silicone rubber |
Inner bracket |
PE |
Applicable Conditions |
|
Water temperature |
3-45℃ |
Inlet water pressure |
0.1-0.6 MPa |
Nominal micro rating |
5-20μm |
Dimensions |
|
End cap outer diameter (mm) |
143/66/90/115/143 |
End cap inner diameter (mm) |
16/28/30/50/50 |
Length (“) |
9.75/10/100/80/253 |
1.The above data are the results obtained by our laboratory.
2.Due to the difference in water quality and water consumption, the replacement cycle of the filter element will be different, depending on the actual use.
Leave a Message
This high-flow under-sink water purifier adopts a unique dual-outlet design, which enables the water purifier to provide two different water qualities...
READ MOREAibote to Showcase Innovative Water Purification Solutions at Aquatech Amsterdam 2025 ---- Unveiling New Products to Forge Global Partnerships From M...
READ MOREThe Carbon Block Filter uses high-grade coconut shell activated carbon that is NSF certified. Coconut shell activated carbon has extremely high adsorp...
READ MORESmart, High-Flow, and Full-Scenario Solutions Drive Evolution of Water Purifier Market To meet the growing demand for healthier lifestyles, the wate...
READ MORE